Backhoe For Sale

Posts Tagged ‘Bucket’

www.equipmentlocator.com Call OFFICE 800-697-3006 Titan Machinery Gillette Wyoming USA 82718 gillette.titanmachinery.com For Sale Used 2010 Case 590SM+3 Loader Backhoe On Yard serial# NAC532456 stock# C50324 205 hours 104757.00 USD • Used • Y 2010-4WD-EXT-P SHIFT-CAB DR-AIR SEAT-3RDSPL LDR- VALVE. 96″ LOADER BUCKET. 2 LEVER PILOT CONTROLS. • Seat – Air • Front Tire Size – 14-17.5 • Rear Tire Size – 21-24 • Fuel Type – Diesel • Condition – 85 • If Yes • # – Front • Dipper – Extendable • Stabilizer Pads – Flip Over • Backhoe Bucket – Gp • BackHoe – Fixed • Loader Bucket – Standard • Operating Weight – 15300 • Backhoe Controls – Standard • Transmission Drive – Power Shift • Bolt On Cutting Edge • Condition – 85 • Auxiliary Hydraulics • Bucket Width – 30 • Ride Control

SOLD! www.equipmentlocator.com Call OFFICE 866-902-7800, CELL 615-642-8389 Nashville Tractor & Equipment 3570 Dickerson Road Nashville Tennessee USA 37207 WWW.NASHVILLETRACTOR.COM For Sale Used 1998 New Holland 555E Loader Backhoe SOLD serial# 031007764 stock# U9941 1980 hours 28900.00 USD • Used • Stabilizer Pads – Flip Over • Seat – Standard • BackHoe – Fixed • Backhoe Controls – Wobble • Bolt On Cutting Edge • Transmission Drive – Std. Shuttle • Operating Weight – 16000 • Dipper – Extendable • Fuel Type – Diesel • Condition – 90 • Loader Bucket – 4 in 1 • Backhoe Bucket – Rock • Bucket Width – 24 • Condition – 90 • Front Tire Size – 12X16.5

www.equipmentlocator.com Call OFFICE 866-902-7800, CELL 615-642-8389 Nashville Tractor & Equipment 3570 Dickerson Road Nashville Tennessee USA 37207 WWW.NASHVILLETRACTOR.COM For Sale Used 1998 New Holland 555E Loader Backhoe On Yard serial# 031007764 stock# U9941 1980 hours 28900.00 USD • Used • Stabilizer Pads – Flip Over • Seat – Standard • BackHoe – Fixed • Backhoe Controls – Wobble • Bolt On Cutting Edge • Transmission Drive – Std. Shuttle • Operating Weight – 16000 • Dipper – Extendable • Fuel Type – Diesel • Condition – 90 • Loader Bucket – 4 in 1 • Backhoe Bucket – Rock • Bucket Width – 24 • Condition – 90 • Front Tire Size – 12X16.5

Virginia, Va., Unit # B85 2004 John Deere 310G Loader Backhoe. B85 This is a nice 4×4 cab with heat and AC Backhoe. Excellent shape, small scrapes and a little rust. Starts easy with no blow by. Machine is tight and handles easily. 4 sticks for backhoe control. Cab is clean with all glass in great shape. Model 310G. Engine-John Deere Model 4045D Net power 70 hp. Power measured @ 2300 rpm. Transmission / 4wd Number of gears forward & reverse is 4 Maximum travel speed forward & reverse 20.5 mph Backhoe Bucket 24in Digging depth 14ft 3in Reach from swivel 17ft 8in Bucket digging force 11106 lb Load height 10ft. 11in Loader — 84in Bucket capacity 1yd 3 Bucket breaking force 8500 lb Clearance at maximum dumping height 8ft 10in General Operating weight 12800 lbs. Overall length 23 ft 3in Overall width 7ft 2in Transport height 11ft 3in Ground clearance 1ft Machine is in great shape, no leaks and priced to sell. Machine sells as is. Any question call or 540-294-7262.

A backhoe is known as a piece of excavating equipment or digger that consists of digging bucket on the end of the two-part articulated arm. Basically, a backhoe looks like a tractor that comes with a loading bucket that placed on the front side and a boom and bucket that placed on the back. It is a little bit more complicated for driving a backhoe. There are several things that you need to keep in mind whether you are going to dive in a field or in the public road. In order to help you get a picture of driving a backhoe, these are going to give you some smart tips.

As the first step, you should walk around the backhoe and you have to make sure that there are no people, obstructions, or pets in the way. After you have checked your safety, you can climb up into the seat of the backhoe’s driver. Then, you need to change the seat and the steering wheel so that you can feel comfortable to reach the controls. Moreover, you can insert the key into the ignition and then start up the backhoe. If you find that the engine has not been run in awhile, you need to allow it to idle for about ten minutes.

For the second step, you need to familiarize yourself with the backhoe controls while you are getting the backhoe to warm up. Next, you need to locate the accelerator and the double brake pedals on the floor. After that, you have to turn around the seat so that you can face the rear of the backhoe. You should know that the longer controls can operate the bucket and the boom.

The third step is to locate the shorter control sticks of the backhoe which can raise and lower the stabilizers. You need to make sure that the stabilizers are all the way up before you are going to drive the backhoe.

The fourth step is to turn back the seat around. Then, you need to lift the front loading bucket so that it is off the ground for a few feet. Furthermore, you should hop the backhoe off and then drop the transport locking pin into place on front bucket.

The last step is to climb back into the driver’s seat. For driving the backhoe, you need to put your foot on the brake pedals and then sift it into the gear. After that, you should push the forward and also reverse the lever in the direction you would like to go. Finally, you can release the brakes and then push the accelerator pedal for driving the machine.

Product Description
30″ Bucket Width, 2.60 cu-ft capacity, 5 teeth, wear bars, powder coat paint

30″ Replacement Backhoe Bucket for Kubota B26

Virginia, Va., Unit # B87 2003 Case 580 Super M Loader Backhoe. This machine is a 4×4, and an extendahoe. Machine works very well, motor starts runs good, does not smoke. All functions work well, hydraulics work very well. Overall backhoe is very good. Has heat . Model Case 580 Super M. Engine-Case Diesel Model family III 445T/M2, Tier II Net power 90 hp Power measured @ 2200 rpm. Number of cylinders 4 Transmission — 4wd Number of gears forward & reverse is 4 Maximum travel speed forward 26.5 mph Maximum travel speed reverse 32 mph Backhoe – extended Bucket 24in Digging depth-std 14ft 4in Digging depth-ext 18ft 3in Reach from swivel-std 18ft 1in Reach from swivel-ext 21ft 8in Load height –std 11ft 2in Load height-ext 13ft. 3in Loader — 82 in 82in bucket with a bolt on cutting edge Bucket breaking force 9164 lb Dumping height 9ft 2 inch General Operating weight 14905 lbs Length w/ bucket 22 ft 8in Width 7ft 8in Height to top of cab 8ft 9inch Transport height 14 ft 3 inch Ground clearance 14ft Machine sells as is. Any question call 540-885-7261 or 540-294-7262.

The general purpose bucket is used for digging and scooping sand, gravel and soil. This is the attachment that you see most often at construction sites. Rock buckets are kind of backhoe attachments that are used to scoop larger rocks, dig ditches and excavating below the frost line. The cemetery bucket is used in cemeteries because it is able to cut 90-degree corners, and is available in many widths.

High capacity sand buckets are also backhoe attachments that are used most specifically in gravel, sand, light soil, ash, loam, and anywhere light materials need to be moved. The lightweight, yet strong, alloy steel makes it easier for the backhoe operator to use all the power of the machine. Then there is the pavement removal bucket. These are the only backhoe attachments that are specifically designed to demolish and destroy asphalt and concrete. The design allows for easier cradling and loading heavy, uneven materials.

A ‘V’ ditching backhoe attachments are able to cut ditches with just one pass. Different slope angles and bottom sizes are available. The rock/frost ripper attachment is equipped with single or triple rippers. This is the best and most efficient backhoe attachment for breaking up shale, limestone, rock, frost, and caliche. The teeth are replaceable when they get worn.

A bucket ripper attachment mounts instantly to the front of an existing bucket and is used to tear through hard surfaces. An asphalt cutter is just about the strongest cutter in the construction industry. It can cut to a depth of 6 ½ inches and can give a clean, straight cut to the asphalt before digging commences. A backhoe coupler attachment will allow the bucket to follow the geometric curve it was designed for, and it allows for the quick attaching of different kinds of buckets as needed.

A ditch and leveling bucket is available as backhoe attachments, and is the ideal attachment for digging, sloping, and precision leveling. The backfill blade is a great leveling attachment that makes quick work of any construction job. The cribbing bucket is a heavy-duty backhoe attachment that is excellent for narrow trenching jobs and digging in tight spaces.

Barrel handling backhoe attachments enable the operator to handle toxic waste, chemicals, oil and more. The pole handler attachment can lift and move poles weighing up to one thousand pounds and 40 feet in length. The heavy-duty construction grapple attachment is excellent for clearing the land, raking the ground, and handling loose or demolished scrap.

The severe service thumb attachment is great for gripping materials with the serrated teeth. It has superior strength and is usually made from high standard alloy steel. There are numerous other backhoe attachments available from various companies. Online research is the best way to locate the backhoe attachment you are in need of. The company who manufactures the backhoe you are now using will also have all the attachments you need in your line of work. A simple phone call is all it takes to locate and purchase the attachments you want.

Using proper equipment ensures speedy completion of work. For all your requirements for New and Used Telehandlers, Digga attachments, Forklifts, backhoe attachments and all equipment and Telehandler training courses, please do visit our site and Call or Contact us – http://www.liftingsolutions.com.au/

I have now put about 12 hours on the backhoe and its working fairly well. Could use stronger stabilizers but will make do with 1.5 inch cylinders for now. All cylinders working quickly except the bucket curl seems kind of slow but it otherwise its probably better that things are not fast enough to get myself in trouble or break the machine.

The Backhoe Bucket is the brawn and muscles of this powerful equipment. With its bucket it can carry more than the weight of 20 construction workers. Think of it as a one armed giant who has claws for hands and its hands deep enough for a man to fit. The good thing is that, this giant is only a machine. Just fuel it with enough gas and operate it to do the manual labor you need to be done.

The work and the time spent for transferring, lifting, excavating and digging materials such as sand, gravel, cement and oil will surely make a difference. This heavy equipment is suitable for works ranging from construction to any forms of digging and excavation.

The backhoe mainly depends on the operator for its maneuvers and movement. He can manipulate the arm and bucket of the backhoe where to go and dig. He is also the one responsible for the navigation whether it should move forward or backward in any direction possible. The operator can be considered as the brain of this powerful and general purpose heavy equipment.

However, the bucket is the muscle; it is the one that carries the burden, literally. A wrong choice of backhoe bucket will result into disaster. Not only can a wrong bucket break but it can also harm the people around it. Safety of your workers is one of the most important things that you must consider if you are going to have your own construction company.

The Backhoe Bucket must be well chosen. It must be compatible to the machine and the situation where this big baby does its job. There are few factors that you must remember before buying any construction product. Too much or too little could be bad news for this baby.

There are certain types of backhoe buckets for certain situations. There is a mini excavator type of bucket for small to medium scale excavation. Another kind is the heavy duty excavation. It is used for soil riddled with rocks or demolishing buildings. Grader is the type of bucket that has longer and stronger teeth near the entrance of the bucket, which is best for semi-digging and lifting.

You cannot just choose randomly buckets for the backhoe. It was previously said that this backhoe is generally multi-purpose heavy equipment. The reason for this is not because it can do many things in the fields of construction, demolition and excavation, but it is because of its bucket adaptability. It can change buckets in order to adjust and perform its best depending on the situation. This ability of the backhoe is almost similar to a Swiss knife where a single Swiss knife can do different jobs.

Owning a set of Backhoe Bucket is quite expensive. It will not only extend the life of your backhoe but the safety of the workers, operators, and the other people around it is insured. However, if you have a small budget, renting a bucket for a backhoe is also great.